How to Fix Oculus Rift HDMI Issues

I recently realized that I wasn’t able to fully utilize my Oculus Rift (powered by the Oculus Go) with my Samsung Galaxy S10+. I’ve been using the Rift for the past few years (with the DK2 version) and was no longer able to stream content from my phone to the headset connected to the HDMI port. I tried different cables and adapters but no luck. I finally figured out that it had to do with the HDMI port on my phone. I had to buy a male to female adapter (can’t use the one that comes with the phone) and I was finally able to use the Rift.

Oculus uses a proprietary HDMI cable which breaks the HDMI standard and causes issues for some people. There are a couple of ways to fix this. The first and easiest is to replace the cable. The second is to break the HDMI standard by using an HDMI switch. The third and hardest (and most expensive) is to change the HDMI cable from the headset to the computer.

The problem occurs when an HDMI signal is sent to the Oculus Rift from an Xbox 360 or Xbox One. This is due to the HDMI cable, which has a different connector compared to the HDMI cables used on other devices. This can be solved using a converter HDMI 2.0b cable. Additionally, the cable might need to be updated to the latest revision, to ensure it is compatible with all current devices. This is a software issue on the Rift. The Oculus software will update automatically, but if the problem persists, a manual update can be done by downloading the latest Oculus software update.

Some Rift users have reported that their PC isn’t picking up the HDMI wire that runs from the headset. Here’s how to resolve the issue so you may return to virtual reality.

Checking for an HDMI Error

There are a few methods to diagnosing the HDMI cable as the source of your Rift’s issue.

  1. From your Start menu, desktop, or taskbar, open the Oculus app.
  2. Select the gear icon in the upper-right corner of the window.
  3. Select Settings from the drop-down menu.

  4. Go to Devices and choose it.
  5. Select Rift Configuration from the drop-down menu.

    Click Devices. Click Configure Rift.

  6. Select Run Full Setup from the drop-down menu.
  7. Depending on your configuration, click Rift or Rift and Touch.

    Click Run Full Setup. Click Rift or Rift and Touch.

  8. Next should be selected.
  9. Next should be selected.

    Click Next. Click Next.

You’ll now be able to view which connections are active and which are not. The HDMI cable isn’t reading, as you can see.

Keep this window open while you finish the instructions below.

Examine each and every link.

The first step is to double-check that your Rift’s connections are in good functioning condition.

Check to see whether you’re utilizing an HDMI splitter.

One issue we’ve noticed is when putting an HDMI splitter on the rear of your computer. Your graphics card (GPU) should have a few connections — most likely DisplayPort, HDMI, or DVI — and if your PC display doesn’t support DisplayPort or DVI, you’ll need to buy an adapter or a new monitor cable. A splitter will not function with both your display and the Rift at the same time.

Take a look at this Cable Matters DisplayPort cable for connecting your display to your computer. It’s six feet long, with a resolution of 1,920 x 1,200 pixels, and costs about $11.

Visit Amazon to learn more.

Would you rather simply buy an adaptor and use the HDMI cable that’s already connected to your monitor? It’s no issue. Connection Matters also sells a $10 converter that allows you to connect your monitor’s HDMI cable to a DisplayPort on the rear of your computer.

Visit Amazon to learn more.

Examine your computer

If the HDMI cable is presently connected to your computer, remove it, inspect the end for damage, then reconnect it to the HDMI port on your GPU.

Make sure it’s not connected to your motherboard’s HDMI port. If you’re not sure which HDMI port is which, have a peek inside your case.

Check to check whether your HDMI cable is now reading in the Oculus app.

Examine your Rift

Is the HDMI cord still not visible? It’s time to double-check the end of your Rift.

  1. Pull the foam-covered portion of the facial interface away from the rest of the headset carefully.

    Remove facial interface.

  2. Once the facial interface has been removed, unplug the wire from the Rift.

    Unplug the cable.

  3. Before replacing the cable, inspect it for any damage. Make sure it’s firmly connected.

    Check the cable's health.

  4. Replacing the facial interface is as simple as matching it with the head-mounted display and gently pushing it in place.

    Replace the facial interface.

Make sure your USB connections are secure.

Problems with your Rift’s USB cord are often misinterpreted as HDMI issues.

To begin, remove your USB cord and connect it to another port. If you’re using a USB 2.0 port, try a USB 3.0 port, and vice versa.

There are known USB compatibility problems with the Rift, which may be fixed with a new motherboard or a USB extension card. Check out our guide on resolving Rift USB problems for more information.

More troubleshooting for display issues

Check out our full Oculus Rift troubleshooting guide for additional information on display issues with your Rift.

The following information was last updated on January 3, 2018: We’ve updated the material to guarantee you’re still receiving the most up-to-date information on how to solve Rift HDMI problems.

We may get compensated if you make a purchase after clicking on one of our links. Find out more.

In this post, I will show you how to disable Nvidia’s VDPAU and Intel’s QuickSync. I will then install the Oculus SDK, and make a fresh install of DK2. Finally, I will install the Oculus Rift software and SDK, and show how to connect the Rift to my PC.

 

Frequently Asked Questions

How do I fix my Oculus Rift with HDMI?

There are a few things that you can do to fix your Oculus Rift with HDMI. You can try the following steps in order: 1) Remove the cable from your computer and plug it back into the headset 2) Unplug the headset from your computer, then plug it back in 3) Plug your computer directly into the headset 4) Try using a different cable

How do I fix my Oculus Rift DisplayPort?

If the display is not showing anything, try plugging it into a different port on your computer.

Does Oculus Rift work with HDMI?

Yes, the Oculus Rift is compatible with HDMI.

Related Tags

This article broadly covered the following related topics:

  • oculus rift hdmi cable replacement
  • oculus rift no hdmi connection
  • oculus rift no hdmi connection reddit
  • oculus rift hdmi adapter
  • oculus rift no hdmi connection laptop