If you’re one of the people who has been experiencing sync issues with the HTC Vive base stations, we have a few tips for you that should hopefully prevent any more issues. We’ve already tested some of these fixes and they work great!
HTC’s Vive VR headset ships with two base stations, which serve as the main connection to the headset and the headphones. The base stations are also the gateway for data, so when you’re playing a game, you can expect all that data to be sent back to the headset to provide a smooth and consistent experience.
You may have been able to resolve the sync issue by turning off and turning back on the Vive base stations. But this is not the best solution, because it could cause additional problems with your headset. For example, the base station signals could interfere with your headset and cause sync problems. This can be easily fixed with a simple line of code, though.
If you’re an HTC Vive owner, you’ve probably spent a lot of time installing the headset’s base stations. Keeping the base stations secured, whether with the supplied mounting kit or with extra attachments, is an essential aspect of the setup procedure. But what if your base stations refuse to connect with each other?
Here’s how to solve the HTC Vive’s frequent sync problems.
Keep an eye out for firmware upgrades.
It’s always a good idea to check for any outstanding firmware upgrades before moving on to our other troubleshooting suggestions. This removes the possibility of a software-related problem that has subsequently been addressed in an update. While these problems aren’t all that frequent, they have the ability to save a lot of time.
Here’s how you can upgrade the firmware on your base stations.
- Open the SteamVR desktop application’s drop-down menu.
- Select Devices > Update Firmware.
- If your base stations need an update, you’ll be prompted to connect them via a micro-USB connection.
Check to see whether your base stations are properly placed.
The HTC Vive’s setup procedure is one of the most complicated parts of the device, and it has proved to be considerably more time-consuming than most of its competitors. This is mostly due to the headset’s tracking arrangement, which necessitates the use of the two base stations placed on the headset.
The following criteria, according to HTC, should be followed in order to offer the greatest tracking:
- Both base stations should be placed above the level of the user’s head (ideally above 6.5 feet).
- The distance between the two stations should be no more than 16 feet.
- Base stations should be oriented downward between 30 and 45 degrees.
Check your base stations’ channels.
The HTC Vive base stations work on a variety of channels, which the device utilizes to decide which sync technique to employ. A button on the rear of each base station may be used to change the channel.
- If the two stations are utilizing wireless optical sync, one should be on channel B and the other on channel C.
- If the two stations are connected through a sync cable, one should be set to channel A and the other to channel B.
Make sure your base stations are well-secured to the wall.
Each HTC Vive station is equipped with a spinning motor that emits infrared light. If the station is not firmly secured, the vibrations produced by this may lead it to become unstable. A blue LED on the front of the base station should illuminate if the vibrations are impacting synchronization and tracking.
The mounting kit that comes with the HTC Vive is the best method to securely install base stations. Make that the clamping ring and wingnut used to hold the base station’s location are tightened to prevent them from drifting over time.
If putting your HTC Vive’s base station into the wall is too permanent for you, there are a few alternative solutions.
Consider using a cabled sync.
Switching to a cable sync for your base stations removes another layer of complication from the HTC Vive’s tracking system. The necessary cable is included in the package with your HTC Vive and is a convenient 15-meter length.
Here’s how to use a sync wire to connect your HTC Vive base stations.
- Using the sync cable, connect the two base stations together.
- One of the HTC Vive’s base stations should be set to channel A, while the other should be set to channel B. The button on the back of the stations may be used to change the channels.
Are you still having trouble?
If you continue to have problems, please let us know! In the comments area, we’ll be happy to assist!
I have been a Vive owner since April and have had some issues with sync that have been going on since the beginning. I finally got tired of trying to sync the base stations to the headset, and did a little googling to find a solution.
Frequently Asked Questions
How do I fix my base stations not syncing?
If your base stations are not syncing, youll need to go through the following troubleshooting steps. Works best on Windows 10. If the base stations are still not syncing, youll need to reset them. If the base stations still wont sync, there may be
How do I reset Vive base stations?
You can reset Vive base stations by disconnecting the base station from the computer (or removing batteries) and re-pairing it to Vive. Q: What is the best desktop computer for Beat Saber? The best computer for Beat Saber depends on your budget and your goals. But
How do I manually update Vive base stations?
To manually update your Vive Base Stations, you will need to follow these steps: Plug in the Vive Base Station and open up SteamVR. Click on Settings (gear icon) in SteamVR. Click on Base Station in the Settings window. Click on Update firmware
This article broadly covered the following related topics:
- htc vive base station repair
- htc vive base station green light
- vive base station sync cable
- vive base station not detected
- htc vive base stations not syncing